1. The lifting mechanism of the straight Olympus microscope condenser includes: 1. Celluloid washer 2. Thumb screw 3. Eccentric gear rod sleeve 4. Gear rod 6. Lifting handwheel 7. When adjusting the binocular nut, one Insert the binocular nut wrench with one hand into the binocular nut on the end face of the handwheel, and use the other hand to insert a screwdriver into the notch of the thumb screw at the other end, and tighten it firmly to stop the slide.
2. Inclined cylinder Olympus microscope Condenser lifting mechanism:
When adjusting, first use a screwdriver to withdraw the resident screw in the middle of the binocular nut for 1 to 2 turns. The bearing washer is tightly fitted with the resident screw, so it will also withdraw along with it and break away from the end face of the gear rod. Then, use the double-eye nut wrench to screw the double-eye nut into the adjustment seat. At the same time, use the other hand to turn the handwheel and carry out the test until the lifting mechanism is properly tightened and can stay at any position before stopping the screwing of the binocular nut. Finally, put the stop screw in again so that the bearing washer touches the gear rod. The reason why such an adjustment can eliminate faults is because the inner hole of the adjustment seat is tapered. The tapered bushing has notches in the axial direction. When the double-eye nut 1 is screwed inward, the tapered sleeve is pushed inward, so that when the tapered sleeve advances, the notch becomes smaller, the inner hole shrinks, the gear rod is clamped tighter, and the friction of the gear rotation is increased. resistance, thereby stopping the automatic drop
Tanım of Ters Çevrilmiş Metalografik Mikroskop
Ters çevrilmiş metalografik mikroskop is bir önemli enstrüman için metalografik araştırma% 2c esas olarak kullanılan tanımlamak ve analiz iç yapı metaller metaller ters metalografik mikroskoplar olabilir kullanılmış için kalite araştırma döküm için% 2c eritme % 2c ısı işlem% 2c muayene ham malzemeler veya analiz malzemeler sonrası işleme.
The ters çevrilmiş metalografik mikroskop sistem is an organik kombinasyon of a geleneksel optik mikroskop ve a bilgisayar (dijital kamera) üzerinden fotoelektrik dönüşüm. O can değil sadece gerçekleştir mikroskobik gözlem on the eyemerce, ama da gözlemle gerçek-zamanlı dinamik on the bilgisayar (dijital kamera) ekran ekran. görüntüler, ve can edit, kaydet ve yazdır the required resimler.
Ters çevrilmiş Metalografik Mikroskop Ne zaman işletim, the observation surface of the sample is down and çakışıyor the working surface, and there is no requirement for the height and parallelism of the sample, hangisi uygun için düzensiz veya büyük örnekler. Ters çevrilmiş metalografik mikroskoplar yaygın kullanılan fabrikalarda, laboratuvarlar, öğretim ve bilimsel araştırma ve diğer alanlar.
